3X-DE600-AA Driver

[SCSI Error]

Can anyone provide me a driver of this card 3X-DE600-AA for Tru64 4.0F

Thanks

[Rob Leadbeater]

Hi,

The drivers for the DE600 should already be in 4.0F with at least patch kit 3, as shown here:

http://h18002.www1.hp.com/alphaserver/options/ases40/ases40_3x-de600-aa.html

What issue are you having ? on what hardware ?

Hope this helps,

Regards,

Rob

[Vladimir Fabecic · Accepted solution]

Like Rob said, it is already in Tru64 4.0F.
Install
ftp://ftp.itrc.hp.com/patch_bundles/tru64/4.0X/DUV40FB22AS0008-20030730.tar
boot with genvmunix, and run doconfig (without arguments).
And provide more details about your problem.

[SCSI Error]

Hi There's no link for download :(

i have my network card installed

but when I do # ifconfig

it only displays sl0 and lo0

when i do # netsetup

sl0 interface can only be seen which only for PPP

[SCSI Error]

Guys I did what you said..

on the normal boot-up its detected

ee0 at pci0 slot 2


but when i type netsetup

that interface didnt shows up

[Vladimir Fabecic]

What do you mean "There's no link for download" ?
I gave you direct link to download patch kit.
Do:
1. Download the patch kit to PC and burn it to CD.
2. Mount CD on TRU64 machine, and extract tar archive somewhere (i.e. /usr/patch)
3. Go to single user mode (# init s) and mount all file systems (# mount -a)
4. Install patch with dupatch
# cd /usr/patch/patch_kit
# ./dupatch
5. boot normaly to see if patch kit installation went OK
6. Shutdown server and boot genvmunix
>>> boot -file genvmunix
7. Do
# doconfig (without any arguments)
and build a new kernel
8. Copy new kernel to /vmunix

Do you have any experience with TRU64?

[Vladimir Fabecic]

What patch kit did you install?

[SCSI Error]

It worked guys!

Rob Leadbeater link didnt worked.

thanks very much!