Need some help with the following error log..

[Robert Brothers]

********************************* ENTRY 1. *********************************

----- EVENT INFORMATION -----

EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 1.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 11:44:24 2006
OCCURRED ON SYSTEM ostfoe
SYSTEM ID x00080022
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x140c000 to 0xff2a000
Digital UNIX V4.0F (Rev. 1229); Fri
_May 26 12:04:39 MET DST 2006
physical memory = 256.00 megabytes.
available memory = 235.90 megabytes.
using 324 buffers containing 2.53
emx: dynamic addressing enabled
Firmware revision: 7.1-1
PALcode: Digital UNIX version 1.92-73
AlphaServer DS10 466 MHz
gpc0 at isa0
pci0 at nexus
isa0 at pci0
ace0 at isa0
ace1 at isa0
lp0 at isa0
fdi0 at isa0
fd0 at fdi0 unit 0
tu0: DECchip 21143: Revision: 4.1
tu0: auto negotiation capable device
tu0 at pci0 slot 9
tu0: DEC TULIP (10/100) Ethernet
_Interface, hardware address:
_08-00-2B-87-57-59
tu0: auto negotiation off: selecting
_10BaseT (UTP) port: half duplex
tu1: DECchip 21143: Revision: 4.1
tu1: auto negotiation capable device
tu1: DEC TULIP (10/100) Ethernet
_Interface, hardware address:
_08-00-2B-87-57-29
tu1: auto negotiation off: selecting
_10BaseT (UTP) port: half duplex
ata0 at pci0 slot 13
ata0: ACER M1543C
scsi0 at ata0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(COMPAQ CRD-8402B 1.03)
scsi1 at ata0 slot 1
itpsa0 at pci0 slot 14
IntraServer ROM Version V2.0 (c)1998
scsi2 at itpsa0 slot 0
rz16 at scsi2 target 0 lun 0 (LID=1)
_(COMPAQ BB00921B91 3B05)
_(Wide16)
comet0: Card type 'Elsa GLoria' with
_8MB framebuffer memory.
comet0 at pci0 slot 15
comet1: Card type 'Elsa GLoria' with
_4MB framebuffer memory.
comet2: Card type 'Elsa GLoria' with
_4MB framebuffer memory.
comet2 at pci0 slot 17
Created FRU table binary error log
_packet
lvm0: configured.
lvm1: configured.
lvm2: configured.
kernel console: comet0
i2c: Server Management Hardware
_Present

********************************* ENTRY 2. *********************************

----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 110. MACHINE STATE
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 10:44:24 2006
OCCURRED ON SYSTEM ostfoe
SYSTYPE x00000000
SYSTEM STATE x0003 CONFIGURATION

********************************* ENTRY 3. *********************************

----- EVENT INFORMATION -----

EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 1.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 10:44:24 2006
OCCURRED ON SYSTEM ostfoe
SYSTEM ID x00080022
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x140c000 to 0xff2a000
Digital UNIX V4.0F (Rev. 1229); Fri
_May 26 12:04:39 MET DST 2006
physical memory = 256.00 megabytes.
available memory = 235.90 megabytes.
using 324 buffers containing 2.53
emx: dynamic addressing enabled
Firmware revision: 7.1-1
PALcode: Digital UNIX version 1.92-73
AlphaServer DS10 466 MHz
gpc0 at isa0
pci0 at nexus
isa0 at pci0
ace0 at isa0
ace1 at isa0
lp0 at isa0
fdi0 at isa0
fd0 at fdi0 unit 0
tu0: DECchip 21143: Revision: 4.1
tu0: auto negotiation capable device
tu0 at pci0 slot 9
tu0: DEC TULIP (10/100) Ethernet
_Interface, hardware address:
_08-00-2B-87-57-59
tu0: auto negotiation off: selecting
_10BaseT (UTP) port: half duplex
tu1: DECchip 21143: Revision: 4.1
tu1: auto negotiation capable device
tu1: DEC TULIP (10/100) Ethernet
_Interface, hardware address:
_08-00-2B-87-57-29
tu1: auto negotiation off: selecting
_10BaseT (UTP) port: half duplex
ata0 at pci0 slot 13
ata0: ACER M1543C
scsi0 at ata0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(COMPAQ CRD-8402B 1.03)
scsi1 at ata0 slot 1
itpsa0 at pci0 slot 14
IntraServer ROM Version V2.0 (c)1998
scsi2 at itpsa0 slot 0
rz16 at scsi2 target 0 lun 0 (LID=1)
_(COMPAQ BB00921B91 3B05)
_(Wide16)
comet0: Card type 'Elsa GLoria' with
_8MB framebuffer memory.
comet0 at pci0 slot 15
comet1: Card type 'Elsa GLoria' with
_4MB framebuffer memory.
comet2: Card type 'Elsa GLoria' with
_4MB framebuffer memory.
comet2 at pci0 slot 17
Created FRU table binary error log
_packet
lvm0: configured.
lvm1: configured.
lvm2: configured.
kernel console: comet0
i2c: Server Management Hardware
_Present

********************************* ENTRY 4. *********************************

----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 110. MACHINE STATE
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 10:44:24 2006
OCCURRED ON SYSTEM ostfoe
SYSTYPE x00000000
SYSTEM STATE x0003 CONFIGURATION

********************************* ENTRY 5. *********************************

----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 302. PANIC
SEQUENCE NUMBER 559.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 10:55:37 2006
OCCURRED ON SYSTEM ostfoe
SYSTEM ID x00080022
SYSTYPE x00000000
MESSAGE panic (cpu 0): bs_osf_complete:
_metadata write failed

********************************* ENTRY 6. *********************************

----- EVENT INFORMATION -----

OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 558.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 10:55:37 2006
OCCURRED ON SYSTEM ostfoe
SYSTEM ID x00080022
SYSTYPE x00000000

----- UNIT INFORMATION -----

CLASS x0000 DISK
SUBSYSTEM x0000 DISK
BUS # x0002
x0080 LUN x0
TARGET x0

********************************* ENTRY 7. *********************************

----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue May 30 10:55:37 2006
OCCURRED ON SYSTEM ostfoe
SYSTEM ID x00080022
SYSTYPE x00000000

----- UNIT INFORMATION -----

CLASS x0000 DISK
SUBSYSTEM x0000 DISK
BUS # x0002
x0080 LUN x0
TARGET x0

********************************* ENTRY 8. *********************************

----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 556.
OPERATING SYSTEM DEC OSF/1
OCCURRED ON SYSTEM ostfoe
SYSTEM ID x00080022
SYSTYPE x00000000

----- UNIT INFORMATION -----

CLASS x0036
SUBSYSTEM x0000 DISK
BUS # x0002

********************************* ENTRY 9. *********************************

[Mark Poeschl_2]

I recommend you install the latest version of WEBES and use the WEBES System Event Analyzer (wsea) to look at the error log. wsea gives a much better interpretation of the binary error log. WEBES can be downloaded from :

http://h18023.www1.hp.com/support/svctools/webes/?jumpid=reg_R1002_USEN