Problem with SCSI interface ITPSA2

[Alice Daniel]

Can someone please indicate what the following SCSI messages mean. ALso, are there any patches for Tru64 v4.0F for ITPSA...


Jul 28 15:13:47 mcdas10 vmunix: ITPSA2: Unable to abort I/O due to selection timeout on bus 2, target 2
Jul 28 15:14:19 mcdas10 vmunix: ITPSA2: Unable to abort I/O due to selection timeout on bus 2, target 2
Jul 28 15:14:51 mcdas10 vmunix: ITPSA2: Unable to abort I/O due to selection timeout on bus 2, target 2
Jul 28 15:15:23 mcdas10 vmunix: ITPSA2: DIP intr, istat = 0x81, dstat = 0x90
Jul 28 15:15:23 mcdas10 vmunix: ITPSA2: can't find request for BA 0xc0006000 (procIntr)
Jul 28 15:15:23 mcdas10 vmunix: n500_iodone() : ccb_status = 0x9 (ERROR)
Jul 28 15:15:23 mcdas10 vmunix: ITPSA2: SCSI Bus was reset
Jul 28 15:15:23 mcdas10 vmunix: n500_iodone() : ccb_status = 0x9 (ERROR)
Jul 28 15:15:23 mcdas10 vmunix: n500_async() : AC_BUS_RESET true.

[Arch_Muthiah · Accepted solution]

Alice,

Do you have PK6, pk7 and pk8. If not, please go thru this patch releases details and choose the correct one for you.

http://www1.itrc.hp.com/service/patch/search.do?searchOsid=tru:tru64:4.0f&pageOsid=tru&searchType=patch.text.searchTypeBrowse&pageNumberStr=0&pageSizeStr=25&BC=main|

Archunan

[Arch_Muthiah]

Alice,

Patch Kit 6 has few patches for ITPSA2 which fixes some timeout and SCSI reset related issues, so please take your system to PK6 (if you don't have upgraded) and lets see the problems.

Archunan