Operating System - Tru64 Unix
1830934 Members
2008 Online
110017 Solutions
New Discussion

SCSI Problem during Station Restore

 
Maximilien KNOPP
New Member

SCSI Problem during Station Restore

Hello,

I have a system using 2 DS10 Stations with true64 UNIX.

I need to restore one of thoses by booting from the other one from ethernet.

But around the end of the restart, I have the folowing messages:

Beginning Adapter/Chip reinitialization (0x1)
cam_logger: CAM_ERROR packet
cam_logger: bus 2
isp_cam_bus_reset_tmo
SCSI Bus Reset performed
cam_logger: CAM_ERROR packet
cam_logger: bus 2 target 0 lun 0
ss_perform_timeout
timeout on disconnected request
Active CCB at time of error
cam_logger: CAM_ERROR packet
cam_logger: bus 2 target 0 lun 0
ss_perform_timeout
timeout on disconnected request
Active CCB at time of error

Please find the complete log.

Is some body could advise me from where this problem is coming from?

Thanks
1 REPLY 1
Vladimir Fabecic
Honored Contributor

Re: SCSI Problem during Station Restore

Please post output of:
>>>show device
Looks like you have a disk problem.
In vino veritas, in VMS cluster