HPE Proliant ML30 Gen10 | VMware vSphere Hypervisor 6.7 | HPE Smart array

[mkhbeldi]

Hello,

I acquired a HPE Proliant ML30 server of the new generation 10 (P06781-425).
By default, this server is equipped with a "HPE Smart Array S100i SR Gen10" software storage controller.
My goal is to configure a RAID 1 on two disks (2 * 1TB) and install VMware vSphere Hypervisor 6.7 Update 2 on the logical disk created by the storage controller (1TB).
But unfortunately, this class S controller only supports Windows systems (does not support VMware).
In order to solve my problem, I need an optional storage controller.
My question is: what is the controller to buy to install VMware vSphere Hypervisor 6.7 Update 2 by configuring a RAID 1 with two 1TB disks.

Thank you !

[RaviTyagi]

Hello 

Greetings of the day !

As per the below mentioned link E-class and P -class Controllers support VMware .

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00019059en_us

https://www.hpe.com/in/en/product-catalog/servers/proliant-servers/pip.options.hpe-proliant-ml30-gen10-server.1011028701.html

Regards

RRT