NSX version support with HPE DX360-8 G10 Plus FSC

[shahj8]

what version of NSX is supported with HPE hardware Model : HPE DX360-8 G10 Plus FSC with Nutanix AOS version AOS version is 6.5.4 and Hypervisor version: VMware ESXi 7.0.3 build-22348816

[Supreeth_B]

Hello @shahj8 

For your setup, i can recommend to use NSX-T 3.x (such as NSX-T 3.1 or newer) to ensure compatibility with VMware ESXi 7.0.3.

NSX-V 6.4.x is another option, but note that VMware has deprecated NSX-V in favor of NSX-T.

If you're planning to use advanced networking features like NSX-T Distributed Logical Routers (DLR), NSX-T Edge, or NSX-T segments, ensure that the NSX-T version you're planning to deploy has been validated for both the hypervisor and Nutanix configuration you're using.

Hope this information has helped you, Please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".

Regards,
Supreeth.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.