Configuring Aruba 6405

[DarrenMurdoch]

Hi there,

We have just purchased a 6405 HPE chassis which has a 24 port RX043C Fibre SFP+ module and a 48 Port POE+ SFP+ module. We are very new to HP Enterprise switches.

I have a J9150D Transceiver in the first SFP+ port on the RX043C module and that connect to a Aruba 6100CX 24 Port SFP+ switch via fibre that also has a J9150D SFP 10G-SR module.

When I do a show transceivers on both switches via the console port (USB-C) it comes back with the correct interface and the SFP details, but there is no light on for either fibre ports and it has a status of Waiting for Link. Is there anything specifically that needs to be configured for the fibre module on the 6405 or the CX6100 to enable fibre operation?
I have checked the Aruba Installation guide but cannot find anything specifically for fibre port configuration or setup.

Any help or ideas would be much appreciated.

Regards,
Darren

[support_s]

Hello,

Thank you for Posting! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.