How to check "show port-access web-based config" on HPE5520 switch

[sns_2205]

I am trying to check the mac-authentication at port level like below command :

HP Switch(config)# show port-access web-based config

Port Access Web-based Configuration

DHCP Base Address     : 192.168.0.0
DHCP Subnet Mask      : 255.255.248.0
DHCP Lease Length     : 10 seconds
Allow RADIUS-assigned dynamic (GVRP) VLANs[No]: Yes
Access Denied Message : Custom:
  Please contact your system administrator to obtain authentication
  privileges.

       |         Client  Client  Logoff    Re-auth   Unauth  Auth    Ctrl
  Port | Enabled Limit   Moves   Period    Period    VLAN ID VLAN ID Dir
  ---- + ------- ------- ------- --------- --------- ------- ------- -----
  1    | Yes     1       No      300       60        1       2       both
  2    | Yes     18      No      999999999 999999999 0       0       both
  3    | Yes     22      No      999999999 999999999 4096    4096    both

but this command is unrecognized on the switch. Is there any alternate command available to check this ?

i seeing below information when i am trying to use above command.

% Unrecognized command found at ' ^ ' position

[Sunitha_Mod]

Hello @sns_2205, 

Thank you for writing to us! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here: Aruba Airheads Community 

You can refer to the below link as well for more details:

HPE Networking forum migration to Aruba Airheads c... - Hewlett Packard Enterprise Community