HPE 5140 firmware problem

[ozkan1]

I want to install hpe 5140 JL827A switch firmware from Solarwinds software, but I don't know the commands. If anyone has done this before, can they share?

[support_s]

Hello,

Thank you for Posting! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[shuff]

To install firmware on your HPE 5140 JL827A switch using Solarwinds software, follow these steps:

1. Preparation:

   • Ensure that your switch is properly connected and powered on.
   • Verify that you have the correct firmware version for your HPE 5140 JL827A switch.
   • Make sure you have administrative access to both the switch and the Solarwinds software.

2. Using Solarwinds to Upload Firmware:

   • Open Solarwinds Network Configuration Manager (NCM).
   • Navigate to the 'Firmware Upgrades' section.
   • Select 'Add New Firmware Upgrade' and choose the HPE 5140 JL827A switch from the device list.
   • Upload the firmware file to the Solarwinds server.

3. Executing the Firmware Upgrade:

   • In the NCM, select the uploaded firmware file and the target device (HPE 5140 JL827A switch).
   • Schedule the firmware upgrade or execute it immediately.
   • Monitor the upgrade process through the NCM interface to ensure it completes successfully.

4. Verification:

   • After the upgrade, verify the firmware version on the switch by logging into the switch CLI and running the command display version.
   • Ensure that all configurations and settings are intact and the switch is operating normally.

[ozkan1]

First of all, thanks for the feedback. I did these, but I need UPGRADE COMMANDS for the 5140 model on solarwinds and I couldn't find them.