JL386A PAT

[coldfix]

Dear colleagues,

I'm interesterd in forwarding traffic from any host in subnet 10.0.0.0/24 .1 (VLAN 100) to a host 10.0.1.2 in subnet 10.0.1.0/24 .1 (VLAN 101) with changing the sender IP address to my L3 core switch JL386A (1920s) IP address 10.0.1.1.

So here it is, step-by-step:

1. Any host from the subnet 10.0.1.0/24 sends traffic to 10.0.0.2 in VLAN 100;

2. My L3 core switch JL386A accepts it on the VLAN 100 interfaces with address 10.0.0.1 (because it's the 10.0.0.0/24 default GW);

3. JL386A changes the sender address to 10.0.1.1 and sends the traffic to host 10.0.1.2 in VLAN 101 (because JL386A is also the default GW of the 10.0.1.0/24 subnet).

Is this possible and do i call it right as PAT?

With respect,

Alex Wolf.

[Sunitha_Mod · Accepted solution]

@coldfix 

Hello Alex Wolf, 

Thank you for writing to us! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here: Aruba Airheads Community 

You can refer to the below link as well for more details:

HPE Networking forum migration to Aruba Airheads c... - Hewlett Packard Enterprise Community