MAC authentication、Storm-Control、QoS [Topic: Aruba CX6000 Switch – MAC Authentication, QoS

[Yoshida2]

I would like to seek your assistance regarding a configuration migration issue.

I have an existing configuration from an AlaxalA switch, as shown below, and I am trying to convert it to an HPE CX6000 series switch.

However, I am encountering difficulties in mapping the configuration properly, especially for the storm-control, QoS, and MAC authentication parts.

Here is a sanitized version of the current configuration:

---
interface gigabitethernet 0/X
storm-control broadcast level pps XX0
storm-control multicast level pps XX0
storm-control action inactivate
storm-control action trap
storm-control action log
qos-queue-group "QUEUE"
mac-authentication port

qos-queue-list "QUEUE" 2pq+6wrr 1 1 1 6 9 12

ip qos-flow-list "VOIP-QOS"
XX qos udp XXX.XXX.XX.0 0.0.0.255 XXX.XXX.XX.0 0.0.0.255 action cos 7 replace-dscp cs7
XX qos udp XXX.XXX.XX.0 0.0.0.255 XXX.XXX.XX.0 0.0.0.255 action cos 7 replace-dscp cs7
XX qos ip any any action replace-dscp default

mac-authentication system-auth-control
mac-authentication max-timer 60
mac-authentication static-vlan roaming
mac-authentication timeout quiet-period 600
mac-authentication id-format 1

radius-server host XXX.XXX.XX.XXX key "XXXXXXX"
!
aaa authentication mac-authentication default group radius
---

Could you please advise:
- How should I properly convert the storm-control, QoS, MAC authentication, and RADIUS settings for HPE Aruba CX6000 switches?
- Are there any specific command equivalents or best practice recommendations?
- If possible, could you also share a sample configuration for HPE Aruba CX6000?

[support_s]

Hello,

Thank you for posting! HPE Networking forum has moved to Airheads Community. For HPE Aruba Networking product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.