New IP Pool add in Existing MZ Zone VLAN 10 || HP A5500-24G-4SFP

[abdularshad]

Dear Community,

We are using HP A5500-24G-4SFP HI Switch.

As we use vlan 10 which is MZ VLAN its configuration is mentioned below.

For SW03

interface Vlan-interface10
description MZ VLAN
ip address 10.125.243.60 255.255.255.192
vrrp vrid 10 virtual-ip 10.125.243.62
vrrp vrid 10 priority 200

For SW04

interface Vlan-interface10
description MZ VLAN
ip address 10.125.243.61 255.255.255.192
vrrp vrid 10 virtual-ip 10.125.243.62

Now we need to add some servers in our Existing Environment but the think is that MZ pool is full.

Now we take another Network Pool and Add IP in MZ VLAN Like Below

For SW03

interface Vlan-interface10
description MZ VLAN
ip address 10.125.243.60 255.255.255.192
ip address 10.125.243.250 255.255.255.224 sub
vrrp vrid 10 virtual-ip 10.125.243.62
vrrp vrid 10 priority 200

For SW04

interface Vlan-interface10
description MZ VLAN
ip address 10.125.243.61 255.255.255.192
ip address 10.125.243.251 255.255.255.224 sub
vrrp vrid 10 virtual-ip 10.125.243.62

Now I want to configure VRRP for NEW MZ VLAN provided. Please suggest what is the best solution for US.

[support_s]

Hello,

Thank you for Posting! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.