Query: Setup Basic VLAN with Firewall

[justaguyy]

# Please point out if I selected the wrong forum

Hi Guys,

I am not from the networking side, so please help me with this.

I have a lab where I have a firewall, a switch (HP 2530-24G), and a vmware server(host).

What I want is to create two VLANs, so that I can use them on my vmware VMs.

Currently, my firewall is connected from port 2 to switch port 1.  And my vmware server is connected from switch port 2. I tried getting the config from ChatGPT, but it's not working.

Below is the configuration I run on the switch

vlan 1
name "mgmt"
ip address 192.168.1.200 255.255.255.0
untagged 1
exit

vlan 10
name "NFR"
ip address 192.168.10.200 255.255.255.0
tagged 1,2
exit

vlan 20
name "LAB"
ip address 192.168.20.200 255.255.255.0
tagged 1,2
exit

On the firewall side, I am configuring port 2 as VLAN and created three vlans

VLAN 1 - IP 192.168.1.1 (Untagged traffic)

VLAN 10 - IP 192.168.10.1 (Tagged Traffic)

VLAN 20 - IP 192.168.20.1 (Tagged Traffic)

Now when I try to connect any laptop from any free port in the firewall, I cannot access the switch. 

[support_s]

Hello,

Thank you for Posting! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.