VLAN Tagging with Main interface Point to point link.

[Gnanamsowri]

we are doing one implimentation of ospf with HP MSR 3024 router, link is given by radio team point to point connectivity.
radio link subnet 10.10.23.0/24 with vlan 500,501 and point to point ip 10.16.30.0/30. point to point ip i can get the ospf but i could not get the radio link ips in the router.

please clarify my doubt how to configure and tag vlan 500,501 in point to point main interface.

ospf 10
area 0.0.0.0
network 10.10.25.1 0.0.0.0
network 10.16.23.0 0.0.0.255
network 10.16.24.0 0.0.0.255
#
system-working-mode standard
password-recovery enable
#
vlan 1
#
vlan 503
description RADIO_Mgmt
#
vlan 504
description SOLOR_Mgmt
#
controller E1 1/0
#
controller Cellular0/0
#
controller Cellular0/1
#
interface Aux0
#
interface NULL0
#
interface LoopBack0
ip address 10.10.25.1 255.255.255.255
#
interface Vlan-interface500
description RADIO_MGMT
ip address 10.16.23.3 255.255.255.0
ospf 10 area 0.0.0.0
#
interface Vlan-interface501
description SOLOR_MGMT
ip address 10.16.24.3 255.255.255.0
ospf 10 area 0.0.0.0
#
interface GigabitEthernet0/0
port link-mode route

description POINT-TO-POINT LINK
ip address 10.16.30.1 255.255.255.252
ospf 10 area 0.0.0.0

#
interface GigabitEthernet0/1
port link-mode route
ip address 10.10.100.1 255.255.255.0
#
interface GigabitEthernet0/2
port link-mode route
#
interface GigabitEthernet2/0
port link-mode route
#
interface GigabitEthernet2/1
port link-mode route
#
interface GigabitEthernet2/2
port link-mode bridge
#
interface GigabitEthernet2/3
port link-mode bridge

[support_s]

Hello,

Thank you for Posting! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.