Blade Server can't PXE Boot From NIC2~NIC4

[Kevin_peng]

In HP Docment the BL20PG3 have four NICS can excute PXE boot,but when I disable Network Adapter 1 from BIOS ,It will show Boot order changed,and can't show F12=Network boot ,then
PXE boot failed ,When I Eanable PXE is successed,
If I want to PXE boot from Network Adapter2,
Need I cxhange other seeting?My Interconnect Model is C-GbE2.

[Albert Austin]

Hi,
Not sure if I followed wxactly what you said but from BIOS have you enabled PXE on the NIC that you want to use? Just by disabling PXE on NIC1 does not enable it on another. You can find it in the BIOS under system options, PXE Boot.