Install Netware 5.1 on DL380G3

[Kinmax]

Hi All:
Is there any one can tell me the full procedure to install Netware 5.1 on DL380G3 with Smart Start7?(or any other way)
I met a problem when installing, Netware installation can't find any disk attached to system, but 5i array card is found and 1 36GB HD had been already configured as a raid 0 in advance.
Do I miss anything?
thanks a lot

[Karen Skweres]

Did you perform a SmartStart NetWare 5.1 Assisted path installation? If so, the Assisted installation integrates the new drivers into the NetWare install automatically. If you performed a manual install you need to integrate the drivers from the SmartStart 7.0 CD into the NetWare install. You can do that by creating a c:\nwupdate directory and copying the files from the SmartStart CD, \compaq\drivers\nw5, to the c:\nwupdate directory. The NetWare installation will use the new drivers in this directory at install time. Or, you can add the new drivers during the NetWare installation by selecting modify on the Device Drivers screen, selecting storage adapters, delete the driver (for the 5i it is cpqraid.ham), insert button, insert button again, follow directions on screen for where you are pulling the driver from (probably floppy drive if not using c:\nwupdate). You need to follow the same procedure to update all the drivers.