Partition sizes when imaging with RDP 2.0

[Mark Nottingham]

Hi
I am trying to deploy an image to a proliant DL380 with 6 disks, and I am trying to configure it with RAID 1 on the first 2 disk and RAID 5 on the remaining 4 disks. I want to set the first partition on the mirrored array to be 18 GB and have the rest of this array taken up with the second partition. The job that comes set up with RDP 2.0 configures the first partition on the mirrored array to MAX, taking the entire array. How do I change this to just take 20GB for the first partition and automatically make the second partition to take all of the remaining space?
Thanks
Mark

[James Kennedy_4]

For the Primary Partition, Change the "Deploy Image" job, under Advanced. Modify the partition size from percentage to a fixed size.

For the 2nd partitions, i generally script after the OS is installed using "diskpart".

[Jeff Allen_5]

See this thread: http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=852229