PXE-E51: No DHCP or ProxyDHCP offer were received

[D.Nguyen]

Hi,

I got an error of PXE-E51: No DHCP or ProxyDHCP offer were received as I'm trying to run the Server Deployment job.

On the PxeDSTrafficLog.txt it shows as below:

Status=UpdateComputerStatus
MAC-Address=001438EF61BF
Boot=Automation
Node-Type=3
BootOptionID=129
MAC-Address=001438EF61C0
Boot=Automation
Node-Type=3
BootOptionID=129
==========End Message==========

I [09:45:44 05/16] (5756): UpdateComputerStatus Received
I [09:45:44 05/16] (5756): Updating MAC 001438EF61BF, State=Automation, NodeType=3, BootOptionID=129
I [09:45:44 05/16] (5756): Updating MAC 001438EF61C0, State=Automation, NodeType=3, BootOptionID=129
I [09:45:44 05/16] (5756): Decode UpdateComputerStatus complete
I [09:45:44 05/16] (5756): select() ...

I'm running the evaluation RDP DS verson 6.5 Hotfix 1
and Proliant Integration Module 2.20.21

DS, DHCP, and PXE are on the same server and client is on the same VLAN.

Any help out there would be greatly appreciated.

Thanks in advance for all of your help out there.

D.Nguyen

[Michael Withrow]

Verify that PXE Option 060 is set on the DHCP Server.

[Gordon Leonard]

Also ensure you have a DHCP scope with enough IP's. How many IP's do you have setup in DHCP?

[Jeffrey Yadzinski_2]

Make sure you have youe cable plugged into the correct port. What hardware are you attempting to PXE boot? Some hardware have designated NICS for PXE (Blades, etc).