1792-Drive Array Reports Valid Data Found in Array Accelerator??

[TADANG]

Hi all,

On my proliant servers, I usually see this messages when checking CQPIML tool.
Does anyone have an idea of what it means?

"post error : 1792-Drive Array Reports Valid Data Found in Array Accelerator"

Thanx,
Maurice

[Sunil Jerath]

Hello Maurice,
The best thing to do would be to update the array controller driver as well as the firmware of the controller. If you post the controller and OS then I would post the links to update.

Regards,

[TADANG]

Hi,

OS : Netware 6 SP3 / Netware 6 SP4
Controller : 6402, 530X, 4200

=)

[TADANG]

Do you know what this messages stands for?

[Sunil Jerath · Accepted solution]

Hello,
This is usually caused by an older firmware of the array controller. Once you update the firmware then this message should go away. What this means is that there was some valid data found and has been flushed to the drives. This is just an informatory message as for as I know about this. Here are links to update the firmware:
SA4200:
http://h18007.www1.hp.com/support/files/server/us/download/14694.html
(This support pack will ask you to make four disks but make disk no 2 only)
SA6402:
http://h18007.www1.hp.com/support/files/server/us/download/19178.html

Regards,