ACU did not detect any supported in your system

[Max.LAM]

Hi,

My server is an ML110 bought recently.
I use EasyCD Setup. My RAID 1 is constructed. I have Two Disk 250 GB to 1,5 Mb/s. In BIOS all are correct and detected. All seems correct but easyCD setup tell me that. So i can't install my OS. I cleared BIOS, I reconfigured, i recreated RAID but nothing. Always tihs message.

PLEASE HELP !

Thanks.

[KarloChacon]

hi

how come?
what is the exactly error you are getting?

bye

[Max.LAM]

ERROR ->

Boot Controller : "Intel 82801 SATA RAID Controller" ("" writen in red)
Boot Controller Disk Size : "0 MB" ("" writen in red)

and

The primary controller configured in your system is not supported by this version of HP proliant Easy Set-Up CD.

PROBLEM ->

The good controller driver is on this CD... When i call it, it exist. The CD is good for ML110 server. But, even if the bios see my disks and my raid, the installer don't see them. SO it writes 0 MB.

I think to have tried all. I need help.

[KarloChacon]

yeah

Easy Setup CD does not support Embedded SATA controller you must install Windows manually
I mean windows and USB floppy to load the drivers for your controller or using nlite which is the best way to go

nlite

nLite is a tool for pre-installation Windows configuration and component removal at your choice. Optional bootable image ready for burning on media or testing in virtual machines.

http://www.nliteos.com/nlite.html

drivers
I don't you OS but here is the link to get it

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3577715&taskId=135&prodTypeId=15351&prodSeriesId=3577708&submit.y=0&submit.x=0〈=en&cc=us

it is called
HP Embedded G5 SATA RAID Controller Driver
the one you need to use

bye

[Max.LAM]

I go to try... i'll say you if it runs.