All LED Blinking on DL360 G10

[SHBID-IT]

Good day, Everyone.

I hope all of you have a great life.

I have a problem with the DL360 G10 server. It shows the all 4 LEDs are blinking (red, green, blue, and amber).
After that, I also check the iLO, in the Integrated Management Log said "Server Critical Fault (Service Information: Power On Fault, Processor(Intel), Processor 1 (02h)). I already tried swapping processor with a new one and still the condition / problem persist.

Any solution for this problem ? Or perhaps someone does have the same issue and solved it ?

Thank you.

[TVVJ]

Hello,

Update the server's BIOS and see if it helps.

Regards,

[SydUmar_1]

Hello @SHBID-IT 
Please refer to the Front panel LED power fault codes - https://support.hpe.com/hpesc/public/docDisplay?docId=a00115362en_us&page=GUID-A3449F9E-44D2-4D45-B312-40B59E51EEBB.html to isolate the fault. 
If this is not conclusive, please update the server with the latest System ROM/BIOS version and check.
If the issue remains after the update, please log a support ticket with the HPE support team for further assistance with this issue. 

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".