Atirage Error - Event ID 2

[Ayman Altounji]

Receiving an error in Event Viewer for the Atirage card, the description field states:
Unable to map required address ranges for graphics card.

Anyone have any suggestions on how to fix this problem? I've already tried re-installed the driver from Compaq SmartStart 4.9 CD.

Thanks.

[Ayman Altounji]

I'm experiencing the same problem on Win2k Server or AS. When you take a look at your device properties Win2k recognizes 2 video cards as well. One with an exclamation point and on without. This is something I've noticed only on 4.9 and 5.0 versions of Smartstart but not on 4.8. I'm trying to get a hold of support to help resolve this issue since now my remote control software doesn't work because of this problem.

[Ayman Altounji]

you have two cards in the devicemanager if you have a remote inside board in the server.win2k always detects the onboard too,because it?s not full disabled.just disable the card in the devicemanager,so you don?t get any errors in the eventviewer anymore