blade enclosure & gbe2 switch vlan.

[Stefan Koch_5]

hello,
for a firewall cluster solution between two enclosures we need the allocation nic to port on gbe switch. We plan vlan between uplink port and nic. Unfortunately the gbe2 switch
not show nic mac address on switch port. We need eth0/eth1 from blade bl25p slot 3 and the port in gbe2 switch. How i now, that physical port 1 in blade eth0. Use anywhone gbe2 switche with vlan.
Request on technical support HP germany not successful, only show switch application guide.
thanks
Stefan

[Jean-Yves Picard]

Hello,

a BL25 blade in slot 3 is connected to port 5 and 6 of both switch.
eth0/eth1 from linux are connected to port 5 of both switch.

Jean-Yves Picard

[Oleg Koroz]

Bay 3
Port 1 to 5
Port 3 to 6

Port 2 to 5
Port 4 to 6

[Oleg Koroz]

1,3 A side
2,4 B side

[Stefan Koch_5]

Thanks,
that help me.

Stefan