ProLiant Servers (ML,DL,SL)
1824839 Members
3509 Online
109674 Solutions
New Discussion юеВ

booting embedded LOM 1 port 1 HPE ethernet 1gb 4-port 331i adapter - NIC (HTTPS ipv6)

 
Tooti-2024
Visitor

booting embedded LOM 1 port 1 HPE ethernet 1gb 4-port 331i adapter - NIC (HTTPS ipv6)

My server is working and suddenly it's shutdown,after booting this i am getting this error.
booting embedded LOM 1 port 1 HPE ethernet 1gb 4-port 331i adapter - NIC (HTTPS ipv6)
Please help
Server: HP ProLiant ML110 gen9
2 REPLIES 2
Cali
Honored Contributor

Re: booting embedded LOM 1 port 1 HPE ethernet 1gb 4-port 331i adapter - NIC (HTTPS ipv6)

This Message only says that the Server is trying to Boot from the Network.

Usually, this is the default enabled in the BIOS, you can Disable "Network Boot" there.

Not a problem so far.

But I assume the Server did not find a Bootable Device and now trying to boot from the Network as a secondary option.

And this is a problem.

So first check your Boot Device (Disk) to see if it is fine.

The Server have an iLO Chips, login an check the Hardware State (special Disk and Raid) there.

Cali

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.
support_s
System Recommended

Query: booting embedded LOM 1 port 1 HPE ethernet 1gb 4-port 331i adapter - NIC (HTTPS ipv6)

Hello,

 

Let us know if you were able to resolve the issue.

 

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo