Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet does not show iLO4 NIC Infomation.

[555-denoh]

Hello Everyone.

I checked the Custmer server configuration information.

1. Model: ML350e Gen8 v2
2. Serial numbers: **Confidential info erased**
3. What happened

Ethernet controller: Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet is not in the iLO NIC information.
It is displayed in the Linux ./f1_linux.sh command.
This happened on two ML350e Gen8 v2s.

Ethernet 1Gb 2-port 361i Adapter is displayed in iLO and dmidecode in /f1_linux.sh. The MAC address is the same, so it is the same HBA.

4. What I want to know

Why doesn't the BCM5719 show up in the iLO NIC information?

It happened on two machines, so I don't think it's a coincidence.
Does anyone have any information?
Could you share that information?

Thanks, best regards.

**Confidential info erased** Capture

**Confidential info erased** Capture

[Moderator edit: Erased the confidential info.]

[shiva_jr · Accepted solution]

Hi @555-denoh,

      Following may be the causes for the network issue.   This model is named in HPE as "HP Ethernet 1Gb 4-port 331i Adapter." Refer Quickspecs page no.60.

1) Issue : Network adapter might be disabled in BIOS
   Solution: Enabled in BIOS

2)  Issue: Older adapter version of Driver and Firmware.
    Soltuion : Network adapter driver and firmware must be updated

3) Issue: Server reboot may required after updading some of the driver or firmware.
   Solution: Reboot the system once.

Regards,
Shiva_jr

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".