Cluster gets shaky with Sp6a

[Ayman Altounji]

After installing Compaq Insight Agents and NT SP 6a the startup device CPQSDM will not start anymore. And so the cluster fails when that particular node becomes the active node. The only solution to this is removing ms cluster server and reinstall ms cluster server older than SP6a.
Is there a REAL solution for this problem. We have 3 CL380's and we have that problem on 6 nodes, so it is not just an accident.

[Ayman Altounji]

Set the SCSI INFORMATION agent inactive through Compaq
Management Agents Applet under Control Panel. Allow the agents
to stop and restart themselves. Then reboot.

If this doesn't resolve the error, then:

Under Control Panel DEVICES, Disable the Compaq SCSI
Device Monitor (CPQSDM). Then Reboot

This will prevent the error. If you will be attaching a tape drive in the future, then you can re-enable the agent or SCSI Device Monitor at that time.