HPE Community
ProLiant Servers (ML,DL,SL)
1825430 Members
3565 Online
109680 Solutions
New Discussion юеВ

Compaq Proliant 2500 Problem

 
Jim Williams_10
New Member

тАО08-17-2004 10:29 AM

тАО08-17-2004 10:29 AM

Compaq Proliant 2500 Problem

I am getting a 1702-Scsi error detectected on systems board. System halted. I can't boot from a floppy or hard drive.

I do not want to use the on-board scsii contoller. Is there a way to disable the on-board controller or other way to bypass this error and boot to the Compaq Smart Start CD?
0 Kudos
Reply
2 REPLIES 2
JohnWRuffo
Honored Contributor

тАО08-17-2004 04:22 PM

тАО08-17-2004 04:22 PM

Re: Compaq Proliant 2500 Problem

Jim:

A 1702 SCSI Cable Error could just mean that a cable has come loose in the server.

Check the SCSI cables coming from the internal controller to the hard drives. Also, if you have one, check the cable to your tape drive. Make sure that any teminators are firmly seated.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
Prashant (I am Back)
Honored Contributor

тАО08-17-2004 05:59 PM

тАО08-17-2004 05:59 PM

Re: Compaq Proliant 2500 Problem

Hi,

it is cable or terminator problem
Plug wide SCSI cable with terminator in the internal controller if it is not going to be used.

Regards,
Prashant S.
Nothing is impossible
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.