ProLiant Servers (ML,DL,SL)
1823788 Members
4293 Online
109665 Solutions
New Discussion юеВ

Could not boot ML NT server

 
IRAKI Said
Occasional Contributor

Could not boot ML NT server

Greetings,

We are facing a problem when rebooting an ML windows NT server.
Below the displayed error messagewhile restarting the machine.

"Attempting to Boot From CD_ROM
Attempting to Boot From Floppy Drive (A)
Attempting to Boot From Hard Disk (C)
A kernel file is missing from the disk
Insert a system disk and restart the system"

I tried to implement the following procedure Q155892 recommanded by Microsoft:

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q155892

Ithis article, the fisrt step to be made is:
1.Boot Microsoft Windows NT from floppy (using the NTLDR on the floppy disk)

But, I wonder what is NTLDR ?
Is there any simple way to make this NTLDR floppy?

Thanks for your help

Regards

4 REPLIES 4
kcpant
Trusted Contributor

Re: Could not boot ML NT server

Hi Iraki,

You can simply copy three NT boot files on a floppy from another NT system. these three files are: NTldr, NTdetect.com and Boot.ini. boot.ini conatins information about in which logical partition the OS is installed, so you have to edit boot.ini to boot up successfully your system.This task will be very easy if you have a same server with same SCSI/ RAID card & same HDD partitioning, you can then simply copy the boot.ini from that system to the floppy.
PreSales Specialist
IRAKI Said
Occasional Contributor

Re: Could not boot ML NT server

Greetings,

I tried to put the three files (NTldr, NTdetect.com and Boot.ini) of another server in a floppy disk, and I put this floppy disk in a the blocked server, but it still does not boot !!!
I do not know if the floppy disk should have a special format ?

Thanks for your help

Regards
kcpant
Trusted Contributor

Re: Could not boot ML NT server

Hi Iraki,

I'm not working on NT from a long time (touched an NT system 1&1/2 yrs back :) ), but I think there is no spacial format, you just put a blank floppy in another server, copy these three files ( through DOS console), edit boot.ini and boot your old server, that's it!
PreSales Specialist
PProcopi_1
Advisor

Re: Could not boot ML NT server

First format the diskette on WinNT system and then copy 3 files and try again