Couple configuration questions about DL360 G6

[David Agosta]

Do the DL360 G6 (model# 504634-001) ship with rails and cable arm or is that an add-on?

Is the prefered method of adding memory in units of 3 (1 DIMM/channel)?

Thanks.

[TarunJain]

Hi David,
Your local hp presales can confirm whether rails and cable arm ships with server or not.
Sometimes sales person can provide you optional part without any extra charge.

The DDR3 memory should be installed in buntch of 3 units.
Better to use following tool for memory configuration
http://h18004.www1.hp.com/products/servers/options/tool/hp_memtool.html

[marcus1234 · Accepted solution]

David the mem configurator does not work correctly,,it has known issues it is hit and miss and not to be trusted til it is sorted..

feks do dl360 g6 mem enquiry for 1 then 2 cpu , and it will be obviously incorrect,


use this doc for memory configuration and to see all available options for your specific server

http://h18000.www1.hp.com/products/quickspecs/13235_na/13235_na.html



This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

[TarunJain]

Hi David,
Got following written in QuickSpecs:
"Deployment/Serviceability:
Sliding rails for in rack servicing ship standard; optional 1U Cable Management Arm "

http://h18004.www1.hp.com/products/quickspecs/13235_div/13235_div.html

[David Agosta]

Mark - yeah I noticed tool was flaky. I was able to find memory config best practice white paper.

[David Agosta]

Found memory best practice guidelines for ProLiant G6 servers.