DIMM Map Out Error

[Stembayo]

I just installed ram in slot 10, but when it was on for a while it rebooted itself and the ram status became “Map Out Error”, please help.

[rabindra11sharm]

Dear Stembayo

As per your given information, I can understand that installed memory in slot 10, is earlier installed in to different slot, and it was mapped with that. it need to reseat on that perticular slot. If you replaced fualty memory on slot 10 then you have to remap the memory from RBSU menu / BIOS settings. It will help us to share Server model and genaration, So we can provide proper memory population guide with you.

Hope, I could provide you with clear and helpful instructions. If you have any more questions or need further assistance, don't hesitate to ask. I'm here to help!

Have a great day!!

[Stembayo]

@rabindra11sharm 

I have repeatedly re-seated and swapped the slot position with another DIMM, but the problem still appears and there are new errors such as:

Uncorrectable Machine Check Exception (Processor 1, APIC ID 0x00000014, Bank 0x00000001, Status 0xBD800000'00100134, Address 0x00000001'F2A3F780, Misc 0x00000000'00000086).

DIMM Initialization Error - Processor 1 DIMMs 9, 10. The identified memory channel could not be properly trained and has been mapped out. The indicated DIMMs will not be available.