ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Disable processors

 
Highlighted
New Member

Disable processors

Hi,

Does anyone know out there if it is possible to have say four cpu's in a DL580 but have one or more disabled using the BIOS?

The reason I ask, is that in the near future I may wish to upgrade Windows 2003 to support increased numbers of cpu's without having to take the server down for any length of time

Cheers

Si
7 REPLIES 7
Highlighted
Honored Contributor

Re: Disable processors

You do nat have such option available.
You can always see all processors.
iCOD is in PA-RISC...

regards
Andrzej Kowalik
Highlighted
New Member

Re: Disable processors

Thanks Andrzej

I thought that might be the case.

Do you if the fact is mentioned in any HP documentation?

Cheers

Si
Highlighted
Honored Contributor

Re: Disable processors

I know that processor disabling is NOT mentioned in any HP document ;-)...
I never heard about such feature in x86 servers.

regards,
Andrzej Kowalik

PS. I knaw, I am only forum user, and any links to HP documents...
Andrzej Kowalik
HP MASE High Availability & Clustering
HP ASE Proliant Servers
:))

PS. Maybe boot.ini switch /numproc, is a way to workaround problem?
AK
Highlighted
Honored Contributor

Re: Disable processors

Hi,

If you have a Uniprocessor HAL loaded and 4 physical CPU's installed it will only "see" one CPU. This is common in Windows 2000 when the wrong HAL is loaded. In your case you could use this to limit the CPU's.

I don't know if that suits but it should do the trick other than whip the CPU's out.

Regards,

Brian
Highlighted
New Member

Re: Disable processors


Hi Guys,

Thanks for your input.

I hadn't thought of looking at it like that Brian, that might be the way to go.

Cheers again

Si
Highlighted
Advisor

Re: Disable processors

Brians solution is ok for seeing only one processor, however the computer needs a restart to use the other HAL. So it only works for you when that down-time is acceptable.
Haaving said that, I do not know of any other way to accomplish what you ask.

Hugo.
You can always improve!
Highlighted
Honored Contributor

Re: Disable processors

Hi,

The BIOS will always see the processors, but you can use the /numproc=x option in boot.in to force Windows to only use x CPUs.

http://support.microsoft.com/kb/833722/en-us

Regards,
Stephen