1837523 Members
3543 Online
110117 Solutions
New Discussion

display drivers

 
Ayman Altounji
Valued Contributor

display drivers

Hi
I tried to install windows 2k on proliant 1850R server with remote insight card.
I disabled the onboard vga card using dip switch SW1.
After I install windows 2K I see 2 display card under device manager.
Is this is the way in should be ?
I installed pcanywhere 9.2.1 on the machine and my remeote control is slow.Without the remote insight card pcanywhere works fine.
Need HELP
3 REPLIES 3
Mark Cloutier
Respected Contributor

Re: display drivers

Yes, it is normal to see 2 display adapters in Microsoft Windows 2000. Please choose the one not being used and disable it through Device Manager.
The performance issue with the RIB board might not improve. Does the RIB work fine if you are not using pcanywhere??
We are here for a good time, not a long time!
Ayman Altounji
Valued Contributor

Re: display drivers

Hi
just got 1850r, system is not booting up! I have checked power supplies and hear fan. Next step is to check switch. Need direction to isolate problem and fix ASAP.
thanks!
Mark Cloutier
Respected Contributor

Re: display drivers

Please reseat the memory, the PCI board, maybe even the processors and voltage regulators. If you still have no success, please remove the first bank of memory and move the rest down. You might have to remove all PCI cards and see if the server will post.
We are here for a good time, not a long time!