DL 180 G5 turns off automatically after 15-20 sec

[MAH_2]

I have DL 180 G5 server . But this server is going off automatillay after 20 sec.

[Taifur]

Hi Linith

It could be reason for virus,hardware issue.
You can check it by reseating all of the parts (RAM,Processor), update the proliant support pack.
It will solve your issue.

Rgds//
Taifur

[MAH_2]

I have already replaced the system board ,power back plane and power supply. Still same problem .Only the remaining parts is RAM ,processor and PCI riser board. When I start the server it is making FAN noise . Display will come .Proliant logo screen. Then it will go off. It is hardware problem only. when it is going off, the internal health LED is blinking in red .No other indication on the sys bd.Please help me in this case. Or any of the replaced parts may be DOA.

[KarloChacon]

go ahead and replace the temperature sensor cable

I've seen that cable causing those problems
this cable is shared in ml310 g5, ml150 g5, dl180 g5

but for your Dl180 g5 you need to replace the Drive cage since it is the part that comes with the temperature cable the drive cage spare number depends on the Dl180 G5 model you got I mean number of HDDs

[MAH_2]

I have removed the Thermal sensor cable.But I am facing the same problem.

[KarloChacon]

I think if you remove it server still won't work since server needs it to power on

I can test that and be back to you just to be sure

[KarloChacon]

you know what I removed that cable and server did not turn off...

[MAH_2]

You mean , when u remove the temeperature sensor cable, it works fine. That means this cable is not must.Please help me in this case. This server is down before 2 weeks. Still it is not UP.

[MAH_2]

Hi Mr.Karlo, if it is sensor cable problem , please give me the spare part no for the same. to order.

[KarloChacon]

but like I wrote I removed the cable and server stayed up so it is not the cable

[MAH_2]

In this case what you r suspecting. I sit system board or memory problem.

[KarloChacon]

but you said you already replaced System board
well I know SB can be DOA according previous notes you have not replaced RAM - Procs - Riser Cage1.

1. RAM As far as I know this server can be tested with 1 RAM at a time

2. get another one there is no other way to test

3. Remove physically the Riser cage these DL180 G5 does not need the riser cage to power on

4. System Board as I said might be DOA
is HP working with you on this?

[MAH_2]

There r 2 RAM in this server. I have tested 0ne by one. Same problem. Removed the PCI riser cage also.I have tested with diffrent processor from BL 460 C same problem.
I have alreay open a case with HP. In this I have already ordered a Drive cage.I am waiting for that. HP also saying to wait for this part.

[KarloChacon]

oh I thought you had replaced it already the drive cage

[MAH_2]

454365-001 this part no I have ordered.Is it correct part for the sensor cable.This is 8 HDD model.

[MAH_2]

Hi Mr. Karlo, After replacing the power switch the server did not turn OFF.
Thanks for ur support.