DL145 G2 Firmware and BIOS for HP SAS/SATA HBA with RAID

[fushigi]

We have a DL145 G2 running Windows2003 R2 STD which detected controller error(from event viewer the error type : EventID: 11) and found that updating raid controller firmware to its latest will fixed the issue.

From HP support Document:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00828623〈=en&cc=us&taskId=101&prodSeriesId=428936&prodTypeId=15351

SInce the box is under critical production and my concern, is there any impact or any possible data lost or do we need to reconfigure the raid after the NEW Firmware is loaded?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=446006&swItem=MTX-5d0f994839d84efcb000e3fe56&prodNameId=3285489&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=1

Thanks in advance
-fushigi

[KarloChacon · Accepted solution]

hi

""is there any impact or any possible data lost or do we need to reconfigure the raid after the NEW Firmware is loaded?""

- you just need to reboot your server and apply the update

- no need to reconfigure RAID again

- no DATA lost at all

so no worries just update your firmware and that's all

regards

[fushigi]

Hi Karlo.Thanks for the inputs.