ProLiant Servers (ML,DL,SL)
1845991 Members
4066 Online
110251 Solutions
New Discussion

DL20 GEN10PLUS VROC - TRYING TO INSTALL WINDOWS SERVER 2022, UNABLE TO SEE RAID5

 
Hollymia
Occasional Visitor

DL20 GEN10PLUS VROC - TRYING TO INSTALL WINDOWS SERVER 2022, UNABLE TO SEE RAID5

DL20 gen10+ is using SATA VROC, and i have 3 SSD now. I built a raid5 by VROC. I was trying to install ESXI in the first place, but then i figured out the vroc doesn't support raid5 for ESXI.... Then i tried to install windows server 2022  by usb media directly. When I was installing it, I found out I had to install the F6 Driver for the  vroc first https://support.hpe.com/hpesc/public/docDisplay?docId=a00112943en_us&page=GUID-31F71CCE-611E-4150-8718-7FCB4A1A3346.html. But when I finally see the drives...... IT'S NOT A RAID, it is still 3 separate drives...........Did i miss anything?

4 REPLIES 4
rabindra11sharm
Esteemed Contributor

Re: DL20 GEN10PLUS VROC - TRYING TO INSTALL WINDOWS SERVER 2022, UNABLE TO SEE RAID5

Dear  Hollymia 

Please check this Creating Intel VROC (SATA RAID)volume in RBSU.  it will help you. 

Also plese check this Intel VROC (VMD NVMe RAID) configuration features.

Also check for OS installation proccess Installing OS on the Intel VROCRAID.

 

If need more assistance, feel free to contact US.

 


Thanks & Regards...
Rabindra
support_s
System Recommended

Query: DL20 GEN10PLUS VROC - TRYING TO INSTALL WINDOWS SERVER 2022, UNABLE TO SEE RAID5

Hello,

 

Let us know if you were able to resolve the issue.

 

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo

kosherham51
Visitor

Re: Query: DL20 GEN10PLUS VROC - TRYING TO INSTALL WINDOWS SERVER 2022, UNABLE TO SEE RAID

 I have the exact same problem. Followed the directions exactly, created a RAID 5 array, downloaded and extracted the correct drivers. Hitting F6 and pointing to drivers, it comes up in the listing of available drivers but when I click next, I get the message "no new devices drivers were found, make sure that the installation media contains the correct drivers, and then click OK"

Please advise.

rabindra11sharm
Esteemed Contributor

Re: Query: DL20 GEN10PLUS VROC - TRYING TO INSTALL WINDOWS SERVER 2022, UNABLE TO SEE RAID

Dear  kosherham51

Already I shared the information. Please do the activity. Hope It will resolved your issue.

If not resolved. Please let us know.

Aside, Dear Hollymia 

Can you perform the activity, Please let us know the current status. 

Thanks & Regards.

Rabindra

hpe_banner_SME_signature.png


Thanks & Regards...
Rabindra