Dl320 G3 W2K SP4 USB controller driver not found

[Alexey Yefimov]

Hello, after system install I used included to SmartStart 7.40 PSP to install all devices, that required HP drivers... But one device still remains uninstalled - Universal Serial Bus (USB) controller (it properties are: PCI bus 0 device 29 function 7). All other USB controllers and bridges are installed. What device is it? And where I can get drivers fot it?

By the way, there is an Intel 82801FR SATA RAID controller, which doesn't supported by SmartStart 7.40 CD.

[Brian_Murdoch]

Hi,

This sounds like a USB 2.0 support issue.

There may be an advanced setting in the DL320G3 BIOs which can sort this.

There is a similar issue with ML110 and device 29 function 7. (See below).

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EL040415_CW01

I hope this helps.

Brian