DL360 G6 Windows Server RAID Problem

[MQual]

Downloaded the P410i driver and windows Server 2012 loads the driver but my freshly created array does not appear.  Ran the SPP firmware updates, ran diag on the array still nothing.  Windows setup will not see the the RAID 5 volume.  Any tips on how to get 2012 installed?

[MQual]

I fixed the problem by one or more of the following 3 actions:

1. Run setup using advanced boot options (press F? when prompted) and choose ignore unsigned drivers option

2. Replaced one of the hard drives which had an eminant failure notice but subseqent scans showed it to be OK.

3. Perform a system wipe using HP FastStart

Hope this helps some of the others I've seen having this problem.

MQual