HPE Community
ProLiant Servers (ML,DL,SL)
1848474 Members
8185 Online
104029 Solutions
New Discussion

DL360 G8 and Nvidia Quadro - can't access console or RBSU

 
stanbaker
Occasional Contributor

‎10-29-2021 05:17 PM - last edited on ‎11-03-2021 04:10 AM by

‎10-29-2021 05:17 PM - last edited on ‎11-03-2021 04:10 AM by

DL360 G8 and Nvidia Quadro - can't access console or RBSU

I have a DL360 into which I installed a Quadro GPU for use in GPU passthrough to a VM.  I can't access the console beyond initial POST because once its past that, the system "grabs" the discrete GPU instead of the integrated video for output, so the HP splash screen and iLO, storage config, etc. are unviewable.

Do I need to remove it and change some settings in the RBSU before re-installation, to prevent the system from utilizing the discrete GPU?

0 Kudos
Reply
2 REPLIES 2
stanbaker
Occasional Contributor

‎10-30-2021 05:44 PM

‎10-30-2021 05:44 PM

Re: DL360 G8 and Nvidia Quadro - can't access console or RBSU

Okay, I solved it myself.  After removing the GPU, I went into the BIOS and found the setting for making the embedded video primary, optional video secondary.

0 Kudos
Reply
BPSingh
HPE Pro

‎11-02-2021 02:08 AM

‎11-02-2021 02:08 AM

Re: DL360 G8 and Nvidia Quadro - can't access console or RBSU

@stanbaker, thank you for the update 



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.