DL360 G9 329-Power Management Controller FW Error

[SGX]

Hi All,

Need suggestion on the error of DL360 G9

Error during Post:
329-Power Management Controller FW Error - Unable to communicate with the FW. Action: Reset iLO FW. If issue persists reset Power Management Controller FW (remove AC). If issue persists attempt to update the FW.

Have update all firmware with success from SPP2018_11, except the power management controller show cannot be found.

Power Managment Controller ver 0.0.2
Power Management Controller ver 2.4

Tested on the following:
1. Unplug ac for more than 24hrs
2. Reset bios and iLO config
3. Reset through system maintenance switch

In ILO power setting, there is error stating “invalid power cap calibration data ...”

[Harsh_b]

Hello SGX, 

i would suggest to open a support ticket with tech support team to get it addressed. seems to be h/w issue if PMC is still reporting issue even after resetting the BIOS/ AC power cycle etc. 

Thanks

Harsh_b