ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 Gen10 can not power on

 
Highlighted
Occasional Contributor

DL360 Gen10 can not power on

Hi folks, 
 

I have a DL360 Gen10 serve can not boot up normaly after two power supply input loss.
It now blinking all front lights. Not getting on.   
Ilo display as blelow picture

https://i.imgur.com/jFL2VeE.jpg

https://i.imgur.com/jFL2VeE.jpg 

Can someone help to resolve this?
Thanks.

4 REPLIES 4
Highlighted
HPE Pro

Re: DL360 Gen10 can not power on

Hi RenoChien,

Good day!

As per the screenshot shared, the server has reported a critical fault.

It is also observed that the server firmware versions are outdated.

If the server iLO is accessible, we recommend you perform an incremental update of the server firmware versions to bring it to the latest.  ( an incremental update has been suggested since the present server versions are extremely old)

If the issue remains unresolved after the firmware update, please raise a hardware support case with us so that hardware replacements can be scheduled as deemed necessary to resolve this error. 

 

 

 

 

Thank You!
I am an HPE Employee

Accept or Kudo

Highlighted
Occasional Contributor

Re: DL360 Gen10 can not power on

HI 

Thanks for you reply.

I have further questions.
1. Could you tell me what is incremental update means? 
2. Where  can i download the laster FW
3. This Server recive from Houston. As you saw screenshot. This Gen10 server IP was set to static IP. But i can't change to DHCP though UEFI. But my internet enviroment is DHCP.
Is that means the olny way to access iLO is front side USB iLo port. Am i right. or May i have other way to access iLO?
4. If need to hardware replacements. How can i do for apply it?

Highlighted
HPE Pro

Re: DL360 Gen10 can not power on

Hi RenoChien,

Good day!

Please find the answers to your queries below.

1. Could you tell me what is incremental update means? 

Seeing that the present server firmware versions are outdated we have recommended an incremental update wherein the server is first updated to 2019 versions and lastly to the latest available 2020 versions. 

2. Where  can i download the laster FW?

You may download the latest server firmware using the link given below. 

https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx

3. This Server recive from Houston. As you saw screenshot. This Gen10 server IP was set to static IP. But i can't change to DHCP though UEFI. But my internet enviroment is DHCP. Is that means the olny way to access iLO is front side USB iLo port. Am i right. or May i have other way to access iLO?

Please confirm if the iLO is configured using DHCP or static IP address. 

4. If need to hardware replacements. How can i do for apply it?

Please log a support case with HPE so that we can help out with part replacements. 

Thank You!
I am an HPE Employee

Accept or Kudo

Highlighted
Honored Contributor

Re: DL360 Gen10 can not power on

Same problem - I bricked a Gen10 after updating SPS firmware for Ripple20.  HPE just pulled it:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_b30fe6d6b8f1489298a1fd33ee#tab-history

NK