DL380 G2 and DLINK Gigabit adapters

[Jason_117]

Has any one experienced any issues with the DLINK DGE-550T adapters becoming "unresponsive"? I have to go in and manualy reset the nic in order for it to work again. I have installed the most current drivers but it does not seem to help. The issue seemed to go away for a while but is back now and seems worse. It only occurs with the DL380 G2 servers.

[Theo Hill_1]

Are there any firmware updates for this controller possibly? Have you tried moving the controller to another slot? Are you running the latest SystemROM on the DL380?

[Jason_117]

I am updrading the ROM tonight and I have tried different slots. I have 3 of these servers and 7 other Proliant servers of which these cards run fine on. Even the original DL380. DLink has no idea.

[Theo Hill_1]

Everything checks out OK on the other end of the cable as well? What is the NIC conecting to?

[Carlos Magno Nunes]

Unfortunately, I do not have a answer, but I have a question.
I've a same problem with dgt-550 and Proliant (ML370 G2).
Did you found a solution to the incompatibility?

Thanks for your help.