DL380 G5 SNMP OID

[YannickG]

Hi,

I have a Proliant DL380 G5 server with iLO2. When I logon to the iLO2 interface I can see the ambient temperature reading.

Is it possible to get the temprature reading with an snmp request ? If so, what is the correct OID ?

SNMP is configured on the server, I can walk the snmp from the server IP and from the iLO2 IP but I can't figure out what OID is the temprature.

Any help or hint is VERY welcomed.

Thanks

[Erdogan Temur · Accepted solution]

Hi,

Upgrade DL380 G5 System BIOS and iLO2 firmware to the latest version listed on hp.com

[YannickG]

Ok, I will but how is it going to help me get my temps ?

Thanks

[Erdogan Temur]

iLO can see from the system temperature.

[Markus M.]

Hi Yannick,

never tried this, but to find out the correct OID(s), take a mib browser and search trough cpqhealth.mib
( http://support.solarwinds.com/updates/searchmib.cfm#snmp_center.aspx )
The following OID describes a table with several temperature related entries:

.1.3.6.1.4.1.232.6.2.6.8. 1-9

Good luck :-)

regards
Markus

[YannickG]

Thanks, that mib browser is awesome!!!

The correct OID for ambient temp is : .1.3.6.1.4.1.232.6.2.6.8.1.4.0.2

Thanks to all!!!