DL380 Gen 9 Won't turn on

[fajriyandi]

Halo.

my server suddenly can't turn on

the 4 led blink 5 times before,so i remove Flexible LOM card

and now blink 9 times,does this mean power supply failure? or the mainboard failure?

so this output from ILO

Server Critical Fault (Service Information: Power On Fault, System Board, P5V/P3V3/Chipset/AUX Regulators 1 (04h))

Server Critical Fault (Service Information: Runtime Fault, Flexible LOM, LOM 1 VRD (10h))

Server Critical Fault (Service Information: Power On Fault, Power Supply, Power Supply 2 (03h))

Server Critical Fault (Service Information: Power On Fault, Power Supply, Power Supply 1 (03h))

i hope i get solution for this.

[rabindra11sharm]

Dear  fajriyandi

Server Critical Fault (Service Information: Power On Fault, System Board, P5V/P3V3/Chipset/AUX Regulators 1 (04h)) is not always caused that system board issue. You need to check once your PSU first as there is more entry in IML Server Critical Fault (Service Information: Power On Fault, Power Supply, Power Supply 2 (03h)). There is an advisory have, Please go through the Advisory do needfull as suggested and check. 

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.