dl380g4 not power off after linux shutdown

[Efim Kushnir]

Dear Sirs,

when I shutdown Linux Redhat ES 3u3 on DL380G4 the OS is down normally but server not power off and power supplies is continue of working.

How I can do that for normal power off the all server ?

BR,
Efim.

[Mugilvannan]

In the event of hardware, software or power failure, Accelerators have a dual port NIC that fails through to wire. In that event, clients still have access to remote servers, albeit at the original slow performance

[Efim Kushnir]

Dear Mugilvannan.
Sorry for my English.

Probably I'm not understand your answer and not anderstans about remote clients but:

I'm working locally on server.
I'm working alone.
Nobody connect to it when I working.

When I do "#shutdown -h now" the OS is down normally, but power supplies of server not power down automaticly - only manual, through press of power button.

The hardware of server not power off after OS is down. As I understant may be is some fix for OS or hardware tuning for it.

For windows 2003 is some fix for power system is working correct in the same case.

Can some body help me resolve it problem or take me way for it ?

BR,
Efim.

[David Claypool]

This is due to bugs in the 2.4.x kernel regarding ACPI. There are some patches available if you search for them.

[Efim Kushnir]

Dear David,
thanks for confirm of my supposes.

May be you khow were can I take it ?
May be I need open service case in HP for resolve it problem ?
On HP site with drivers and SW not contain it. For Win2k3 power fix is present, for Linux RHEL ES 3.x not.

As you HP employee may be take me right way ?

BR,
Efim.

[David Claypool]

This is not an HP problem but a Linux kernel problem. Here's a Google search that will give you some more information. I cannot recommend which approach to take for your specific issue.

http://www.google.com/search?q=acpi+linux+kernel+2.4+bugs

[Efim Kushnir]

HP not support linux if ACPI parameters of kernel was change. It official answer of support center of HP