DL380P G10 P816 Controller Disks only 1.7TB iso 4TB (UBUNTU 14.04)

[HannesDB]

setup:

all 4TB disks are configured as single disk raid0 configs, BIOS, raid controller and ILO see 4TB disks, when in the OS I only see 1.7TB

sudo parted /dev/sdb 
GNU Parted 2.3
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print 
Model: P816i-a SR RAID00 (scsi)
Disk /dev/sdb: 1802GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number Start End Size File system Name Flags

in ILO the physical drive has 

 Physical Drive in Port 1I Box 1 Bay 2
Status	 OK
Serial Number	---redacted--
Model	MB4000GVYZK
Media Type	HDD
Capacity	4000 GB
Location	Port 1I Box 1 Bay 2
Firmware Version	HPG4
Drive Configuration	Configured
Encryption Status	Not Encrypted

the logical drive is 

  Logical Drive 02
Status	 OK
Capacity	3725 GiB
Fault Tolerance	RAID 0
Logical Drive Type	Data LUN
Encryption Status	Not Encrypted

Anyone an idea if I'm missing a module or something? 

Previous installs (on Gen8 and Gen9 with p4xx raidcontrollers) went flawless and happend in the same manner. 

[Suman_1978]

Hi,

DL380 Gen10 requires Ubuntu 16.04.3 (HWE Kernel 4.10)
Gen10 support requires the HWE kernel 4.10 to be selected during 16.04.3 installation.
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/exceptions/ubuntu_exceptions.aspx

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //