HPE Community
ProLiant Servers (ML,DL,SL)
1755486 Members
3755 Online
108833 Solutions
New Discussion юеВ

DL580 ILO port flapping

 
Jcranley
Occasional Contributor

тАО11-24-2009 03:10 PM

тАО11-24-2009 03:10 PM

DL580 ILO port flapping

Hi,
I have installed a DL580 G5 and the network guys configuring the switch was saying that the ILO port is flapping. They asked what was the speed of the ILO port, after checking the forums, I found that it was 10/100, as they wanted me to set the speed, I checked in the ILO configuration and could not find anything.
Is there a way of checking the server to see if there is anything wrong with the port.

Thanks and regards
James
0 Kudos
Reply
2 REPLIES 2
marcus1234
Honored Contributor

тАО11-26-2009 02:59 PM

тАО11-26-2009 02:59 PM

Re: DL580 ILO port flapping

set router switch to auto negoiate,,, best option
0 Kudos
Reply
TarunJain
Respected Contributor

тАО11-26-2009 03:25 PM

тАО11-26-2009 03:25 PM

Re: DL580 ILO port flapping

Hi James,
Try the following steps to set the link speed of ILO2.
1. Access ILO2 and go to Administration Tab (last tab)
2. Go to Settings -> Network in the left frame
3. In the Right Pane Select Link speed.
Best speed is 100Mb/FD

I am an HPE Employee

Accept or Kudo
src="/html/assets/hpe_banner_SME_signature.p ng">

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.