Dos boot disk for HP NC7781

[Jonathan Yungel]

I am trying to image our ML370 Proliant server. I can not find the Ndis Drivers anywhere. Does any one have a boot disk for the ML370 with HP NC7781 Drivers on it or can anyone point me in the right direction?

[Sunil Jerath]

Hello Jonathan,
Please check the following Site:

http://www.bootdisk.com/

Regards,

[Seth Parker]

If you're using Ghost, you just need to make a diskette that uses the q57.dos driver. The link below will tell you which NICs use the q57.dos driver as well as let you download the newest one.

http://h18007.www1.hp.com/support/files/server/us/download/16828.html

You can copy the newest one over the one Ghost puts on the diskette.

Good luck!
Seth

[Samir_26]

I tried your suggestion of using q57.dos from SP21893.exe. I am unable to created a boot disk using Ghost.

I have a DL380 with a NC7781. Do you ahve any other suggestions?

[Mike Meyer_6]

I'm having the same issue here trying to create a DL360 G4 we just got in, and have tried the n1000.dos and q57.dos drivers and neither worked.

Has anyone successfully got this to work on a new DL360? I need to ghost 20 servers in the next little bit.

THanks

[Mike Meyer_6]

BTW, I think the DL360 G4 has the nc7782 driver.

[amhakassa]

Hi Mike,

You can download it from this link
http://h18023.www1.hp.com/support/files/networking/us/download/22808.html

Regards
Amha Kassa

[amhakassa]

Hi Mike,

The instruction how to use it is in the same link so carefuly read everything. I recommend to read the readme file, which will be found in the extracted file from the download, as well

Regards
Amha Kassa

[elliott_3]

What should be in the protocol.ini so that the right NIC is recognized? Thanks.