Drive size not detected with P410 controller.

[Stephen Picardi]

I am  upgrading an ML330 G6 from 4 300GBSAS drives to 4 4TB SAS drives.

The controller sees the drives but states the size as zero.

I've tried to install (what I thinkis) the latest firmware for the P410 but I tells me I have the latest version. It's currently version 3.0

A diagnostics report tells me this verion of the firmware does not support the drives but I cannot find a later version.  Any suggestions?

[Suman_1978]

Hi,

P410 may not support 4TB SAS Drives.  Please refer to the QuickSpecs.

The latest firmware version is some where around 6.x, see this link and choose the operating system.

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3883933

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers