driver P400 for Dl380 G5

[vferrer]

I try to reinstall win2003 in DL380 G5 with ctrl P400. I know I need floppy drive compat for boot and driver P400 for W2003. I download several driver of storage on page DL380, but noone runs ok. Somebody can give me link for download driver for P400 to put in boot sequence after F6 from floppy?. Thanks for answer.

[Jorge Pons · Accepted solution]

Hi

The best way to install is with PSP (Proliant Support PAck), in this case, it load the necessary driver to install.

Here is the web where you can download driver (I dont know if is the web where you download yet)

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=es&cc=es&prodNameId=1157689&taskId=135&prodTypeId=329290&prodSeriesId=1157687&submit.y=0&submit.x=0〈=es&cc=es

Regards, Jorge

[Terry Hutchings]

The driver for 2003 is available here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=1157687&prodNameId=1157689&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-9d6d9d9bd6c64fe9a7907c4aeb

[vferrer]

Gracias Jorge.
Thank you Terry.
Perfect.....
I believe the I must create available storage in routines raid in boot (F8) making visible raid's disk before try with severals drivers. Thanks boys.