E1000 and PSPv7.80 on DL380

[Diane M. Morin]

Hi,

Has anyone seen this problem w/ E1000 and PSP7.80? I am able to install PSPv7.60 w/o a problem.

+ make -C src clean
+ make -C src KSP=/lib/modules/2.6.9-55.ELsmp/build INSTALL_MOD_PATH=/var/tmp/e1000-7.4.24b-root KVERSION= MANDIR=/usr/share/man CFLAGS_EXTRA= install
In file included from /usr/src/redhat/BUILD/e1000-7.4.24b/src/e1000.h:87,
from /usr/src/redhat/BUILD/e1000-7.4.24b/src/e1000_main.c:29:
/usr/src/redhat/BUILD/e1000-7.4.24b/src/kcompat.h:1098: error: redefinition of typedef 'irq_handler_t'
include/linux/interrupt.h:36: error: previous declaration of 'irq_handler_t' was here
make[2]: *** [/usr/src/redhat/BUILD/e1000-7.4.24b/src/e1000_main.o] Error 1
make[1]: *** [_module_/usr/src/redhat/BUILD/e1000-7.4.24b/src] Error 2
make: *** [default] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.59336 (%build)
Bad exit status from /var/tmp/rpm-tmp.59336 (%build)
A command, "rpmbuild -bb --quiet --clean --rmsource ${RPMDIR}/SPECS/e1000.spec", necessary to complete the installation of this component failed with error code 1: "Operation not permitted"
Installation of this component FAILED.

[Virginia Jackson]

Are you trying to install the PSP 7.80 on a system with RHEL4 Update 5 installed? If so, the PSP supporting that update is not available yet. The e1000 driver supporting update 5 will be available on hp.com shortly.

[Diane M. Morin]

Hi,

I'm using RedHat 4 update 4.

diane

[Michael Aos]

Same error installing PSP 7.80 on RHEL 4.5.

It's worked fine on other boxes.

Mike

[Michael Aos]

"Please refer to e1000-7.5.5a-2.src.txt for installation instructions."

Where exactly is this located?

Mike